Kanto PDX650

Full-motion TV wall mount, extends up to 55 cm, up to 57 kg, VESA 600 × 400

Kanto PDX650

Full-motion TV wall mount, extends up to 55 cm, up to 57 kg, VESA 600 × 400

Product form

693 lei

In stock

Free pickup in our shop(s)
  • Shipped today? Order within: Oct 17, 2026 16:00:00 +0300
    • Only 5 cm from the wall when folded
    • Up to 55 cm of reach
    • Tilt +15°/−3°, swivel 80°
    • Solid steel, tested for 57 kg
    • Hardware for wood studs and concrete
    Specifications
    • VESA: 100 × 100 – 600 × 400
    • Maximum load: 57 kg
    • Distance from wall: 5–55 cm
    • Tilt: +15° / −3°
    • Swivel: up to 80° in either direction
    • Wall plate: 56 cm
    • Weight: 10.2 kg

    SKU: PDX650

    • 30 дни право на връщане
    • Гаранция месеца

    Kanto — Full-motion TV mount

    Your TV, exactly where you want it

    The PDX650 keeps the TV just 5 cm from the wall when folded and brings it up to 55 cm forward when you need a different angle.

    In shortVESA 100 × 100 – 600 × 400Up to 57 kg5–55 cm from the wall

    The PDX650 is a solid steel full-motion wall mount with dual arms. Its tilt head nestles into the frame, so the TV can sit 5 cm from the wall, while the arms bring it up to 55 cm forward for tilting, swiveling or reaching out of an alcove. Kanto tests it for 57 kg and states that even at maximum weight and full extension the TV stays in place with no sag. The H-frame assembly leaves wide access to the TV's connections.

    Kanto PDX650 technical drawing with dimensions: 5–55 cm from the wall, 55.8 cm wall plate

    From 5 to 55 cm off the wall

    The official technical drawing shows the key dimensions: 5 cm deep when folded, 55 cm at full extension, and the wall plate. The TV brackets cover VESA hole patterns from 100 × 100 to 600 × 400.

    • Distance from wall: 5–55 cm
    • Wall plate: 56 cm
    • VESA: 100 × 100 – 600 × 400

    The right angle from any seat

    The accessible tilt mechanism gives 15° forward and 3° back; once you have found the angle, tighten the nuts and the TV stays put. The articulating arms swivel the TV up to 80° in either direction, depending on its size.

    • Tilt: +15° / −3°
    • Swivel: up to 80° in either direction
    • Adjustable horizontal leveling
    Kanto PDX650 mount from the side, arms extended

    Cables hidden in the arms

    Four cable raceways sit under the arms: loosen a screw, twist the raceway aside, lay in the cable and refit the screw. Route every cable down one side, or power and HDMI down opposite sides. The silent clip comes from Kanto's official overview.

    57 kgmaximum load
    55 cmmaximum extension
    80°swivel in either direction
    5 cmminimum distance from the wall

    The finish

    Black Kanto PDX650 mount, cut outTV brackets of the Kanto PDX650 mount, front viewCable routed through the raceway under the Kanto PDX650 arm

    Black, the PDX650 version (UPC 800152713038). Kanto sells the white version separately as the PDX650W.

    Frequently asked questions

    Which TVs fit?

    TVs with a VESA pattern between 100 × 100 and 600 × 400 that weigh no more than 57 kg. The box includes M5, M6 and M8 screws in several lengths and spacers for curved TVs or TVs with an uneven back.

    What kind of wall can it go on?

    Kanto supplies hardware for wood studs and for concrete. The manual requires a wall that supports more than 5 times the combined weight of the TV and the mount, and states that the mount must not be installed on steel stud walls or cinder block walls. If you are unsure about your wall, consult an installer.

    How far from the wall does the TV sit?

    5 cm with the mount fully folded and up to 55 cm at full extension.

    In the box

    • the full-motion mount, with wall plate and TV brackets
    • M5, M6 and M8 TV screws in several lengths
    • 5, 10 and 14 mm spacers and washers
    • 4 M8 × 65 mm lag bolts and 4 concrete anchors
    • M6/M8 wrench and 5 mm hex key
    • paper wall template for marking pilot holes
    • installation manual (English, French, Spanish)

    Full specifications

    Manufacturer code (SKU)PDX650
    UPC800152713038
    Typefull-motion TV wall mount
    VESA100 × 100 – 600 × 400
    Maximum load57 kg
    Distance from wall5–55 cm
    Tilt+15° / −3°
    Swivelup to 80° in either direction, depending on the TV
    Wall plate56 cm, for two wood studs up to 16″ apart
    Mountingwood studs or concrete
    Cable managementintegrated raceways under the arms
    Levelinghorizontal, adjustable
    Materialsteel, powder-coated finish
    Weight10.2 kg
    Colourblack
    Sold as1 piece

    Advice before you buy

    We tell you whether the Kanto PDX650 suits your TV and wall, or whether another Kanto mount is a better fit.

    24-month warranty

    Statutory conformity warranty, with service through Audio Monkey.

    A question about the Kanto PDX650?

    Message us on WhatsApp

    Manufacturer's website: Kanto Mounts — PDX650

    Sign up for our newsletter

    AUDIO MONKEY

    Присъедини се към общността на Audio Monkey

    Получавай новини, покани за прослушвания и оферти преди всички останали.

    • Прослушвания в шоурумите ни в Букурещ, Румъния: стерео и домашно кино
    • Denon срещу Marantz, сравнени в една и съща стая
    • Нови продукти и ограничени наличности
    • Разопаковани и демонстрационни продукти, преди да се появят в сайта
    • Монтаж и калибриране у дома ви

    Присъедини се към общността на Audio Monkey

    Login

    Sign in