Kanto Audio

SUB6

Subwoofer, powered and sealed, with a 6-inch woofer and 100 W RMS

Kanto Audio

SUB6

Subwoofer, powered and sealed, with a 6-inch woofer and 100 W RMS

Product form

999 lei / Bucata 1 449 lei

In stock

Colour Black

Free pickup in our shop(s)
      Installment payment options
      • Card Avantaj6 installments · Card Avantaj
      • Banca Transilvania6 installments · Banca Transilvania
      • Garanti Bank6 installments · Garanti Bank
      • Raiffeisen Bank12 installments · Raiffeisen Bank (în showroom)
      TBI Bank Klarna
      • Sealed enclosure: tight, articulate bass
      • Only 22 cm wide, it fits beneath a desk
      • Extends your system down to 40 Hz
      • Amplifier, AV receiver, powered speakers
      • Auto mode: wakes on signal; <0.5 W idle
      Specifications
      • Woofer: 6-inch paper cone, sealed enclosure
      • Amplifier: Class D, 100 W total RMS (200 W peak)
      • Frequency response: 40 Hz–175 Hz
      • Low-pass filter: 40 Hz–120 Hz; phase: 0° / 180°
      • Input: 1 x RCA L/R, line level
      • Power: AC 100–240 V, 50/60 Hz; standby under 0.5 W
      • Dimensions (W x D x H): 22 x 22 x 24.1 cm; 5 kg

      SKU: 800152723815

      • 30 de zile perioada de retur
      • Garanție 24 luni
      • Livrare prin curier sau ridicare din showroom București

      Resigilate

      Documente utile

      Kanto Audio — Subwoofers

      Compact bass that blends in

      SUB6 is a sealed powered subwoofer with a 6-inch paper cone woofer and a Class D amplifier of 100 W total RMS. At 22 cm wide, it is sized for a desk, a bookshelf system or a small living room.

      At a glanceSealed 6-inch subwoofer100 W total RMS, down to 40 HzCrossover and phase for easy blending

      Kanto designed SUB6 for smaller rooms and desks, where a large home cinema subwoofer would dominate the space. It adds controlled bass to music, films and games, and Kanto describes the goal as enhancing the system without overwhelming it.

      The 6-inch paper cone sits in a sealed enclosure and is driven by a Class D amplifier of 100 W total RMS (200 W peak). Kanto rates the response from 40 Hz to 175 Hz.

      Kanto Audio SUB6 subwoofer in matte black on the floor of a furnished room, near speakers

      Sealed enclosure, tight bass

      A sealed enclosure keeps bass tight and articulate, preserving the rhythm and texture of the music. The cabinet is 22 cm wide and 22 cm deep, so SUB6 fits beneath a desk or beside a media console.

      • Woofer: 6-inch paper cone
      • Enclosure: sealed, engineered wood, rubber feet
      • Finish: durable laminate, matte

      Controls for blending with your speakers

      The low-pass filter sets the highest frequency the subwoofer plays, adjustable from 40 Hz to 120 Hz, so it hands over to your main speakers where they start to roll off. The phase switch (0° or 180°) helps when the subwoofer sits farther away than the speakers: Kanto recommends listening in both positions and keeping the fuller one.

      • Level control and low-pass filter, 40 Hz–120 Hz
      • Phase switch: 0° or 180°
      • Power mode: On, Auto (wakes on signal), Off; status LED green or red
      Rear of the Kanto Audio SUB6 subwoofer in matte white, with RCA inputs and controls
      6 inpaper cone woofer
      100 Wtotal RMS
      40 Hzlower limit
      22 cmwide

      The colours

      Kanto Audio SUB6 subwoofer in matte black, cut out on a transparent background
      Kanto Audio SUB6 subwoofer in matte white, cut out on a transparent background

      Two finishes: matte black and matte white.

      Frequently asked questions

      Can I connect it to Kanto powered speakers?

      Yes, through their subwoofer output. If the speakers already apply a low-pass filter to that output, Kanto recommends setting the crossover on Sub6 to 120 Hz.

      My amplifier has only one RCA subwoofer output. Is that enough?

      Yes. A single RCA output can go to either the left or the right input. If your device has both left and right subwoofer or preamp outputs, Kanto recommends using both.

      Does it stay on all the time?

      You choose. The power mode switch has three positions: On keeps it active, Auto powers it on when audio arrives and puts it in standby after several minutes of silence, Off keeps it in standby. Standby consumption is below 0.5 W.

      Where should I place it?

      Placing it close to walls or corners adds bass but can make the sound less clear. Kanto recommends taking time to try a few positions, because the room has a large effect on the result.

      In the box

      • SUB6 powered subwoofer
      • Power cord
      • RCA cable
      • Manual

      Full specifications

      TypePowered subwoofer, sealed enclosure
      Woofer6-inch paper cone
      AmplifierClass D
      Power100 W total RMS (200 W peak)
      Frequency response40 Hz–175 Hz
      Low-pass filter40 Hz–120 Hz, adjustable
      Phase0° / 180°
      Input1 x RCA L/R, line level
      Power supplyAC 100–240 V, 50/60 Hz
      Standby consumptionunder 0.5 W
      Dimensions (W x D x H)22 x 22 x 24.1 cm
      Net weight5 kg
      Shipping box (W x D x H)32 x 32 x 35 cm, 6.3 kg
      Cabinetengineered wood, rubber feet
      Finishesmatte black, matte white

      Advice before you buy

      We help you choose the crossover and placement for your speakers and room.

      24-month warranty

      Legal conformity warranty, with service through Audio Monkey.

      Have a question about SUB6?

      Ask us on WhatsApp

      © 2026 Audio Monkey

        Login

        Sign in