Pro-Ject MaiA S3

Amplificator integrat stereo, cu 2 x 23 W și Bluetooth®

Pro-Ject MaiA S3

Amplificator integrat stereo, cu 2 x 23 W și Bluetooth®

Form

2.499 lei / Bucata 2.999 lei

În stoc

Culoare Silver

Ridicare gratuita din showroom
      Optiuni plata in rate
      • Card Avantaj6 rate · Card Avantaj
      • Banca Transilvania6 rate · Banca Transilvania
      • Garanti Bank6 rate · Garanti Bank
      • Raiffeisen Bank12 rate · Raiffeisen Bank (in showroom)
      TBI Bank Klarna
      Specificatii tehnice
      • Putere iesire: 2 x 23W/40W , 8/4ohms (1%THD)
      • Amplificare casti: 2x 75mW , 32ohm (1%THD)
      • Iesire casti: 6,3mm jack (16 – 600ohms)
      • Intrari analog: 3x pair RCA, 1x phono MM (RCA)
      • Intrari digitale: RCA coax, 2 x Toslink, Bluetooth 5.0 (aptX)
      • Raspuns in frecventa: 20Hz - 20kHz

      Cod produs: MAIAS3SV

      • 30 de zile perioada de retur
      • Garantie 24 luni
      • Transport gratuit pentru comenzi peste 300 RON in Romania
      • Livrare prin curier sau ridicare din showroom Bucuresti

      Resigilate

      Documente utile

      Coduri produs: MAIAS3SV9120097828972

      MaiA S3

      Compact & Versatile Audiophile Integrated Amplifier

      Made In Europe


      THE NEW MAIA S3

      The MaiA S3 is the all in one solution for your hifi system. Not only the circuit design was reworked, also the case has been significantly changed and the MaiA S3 uses our new S3 case. Due to the bigger size we were able to improve the circuit board layout in terms of electromagnetical interference. With its 8 inputs you are ready for any kind of source device.


      Versatile and Compact

      The MaiA S3 offers eight inputs. Ready for digital or analog sources, wired or wireless – you’re covered. The phono section can handle MM, MI, or high output MC cartridges. Hook up your tuner or any other analog device to one of the three line-level RCA inputs. The DAC section allows a coax and two optical connections. The high definition aptX™ HD Bluetooth 5.0 wireless input allows streaming your favorite music via your phone.


      Versatile

      Phono, Line, Digital, Bluetooth 5.0

      Use your favourite headphones or connect your speakers with the 4mm banana plugs and the low noise amplifier will do the rest. The variable RCA output also allows you to include a subwoofer in your setup.

      aptX™ HD

      Bluetooth 5.0

      aptX™ HD with our new Bluetooth 5.0 chip will allow you convenient high resolution streaming from your smartphone.


      Remote Control

      Control it the easy way

      Control your MaiA S3 and an additional CD Box S3 or DS3 with the new supplied remote.

      Handmade in EU

      Since 1991

      Made in Europe by technicians, engineers and designers with decades of experience. Expert craftsmanship. Sustainable products with a long lifetime. Audiophile audio performance.


      Technical Specifications

      Power output: 2x 23W / 40W at 8 / 4ohms (1% THD)
      Frequency response (20Hz - 20kHz): <-0,5dB @4ohm
      Channel separation: - 69dB at 10kHz
      Signal to noise ratio: 97dB (101dB-‚A‘ weighted) @4ohm
      THD: < 0,04% at 10W / 4 ohms
      Headphone amplifier: 2x 75mW at 32ohm (1%THD)
      Headphone output: 6,3mm jack (16 – 600ohms)
      Analogue inputs: 3x pair RCA, 1x phono MM (RCA)
      Digital inputs: RCA coax, 2 x Toslink, Bluetooth 5.0 (aptX)
      D/A-converter: Cirrus Logic CS4344 24bit/192kHz
      Variable output: 1x pair RCA
      Speaker connectors: 4mm Ø banana plugs, spades connectors or naked wire
      Power supply: 20V/3A DC;100 - 240V, 50/60Hz
      Standby Power consumption: < 0,5 watts
      Dimensions WxHxD: 206x55x153 (176mm with sockets)
      Battery remote control: 1 x CR2032 / 3V or CR2025 / 3V
      Weight: 1070 g without power supply

      Produse recomandate

      Avem mereu noutati - fii printre primii care descopera aparitiile de ultima ora in lumea audio-video!

      © 2026 Audio Monkey

        Contul tau

        Intra in cont